ECEL-301 Lab6

ECEL-301 Lab6 - Drexel University Electrical and Computer...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Drexel University Electrical and Computer Engineering Dept. Electrical Engineering Laboratory I, ECEL 301 TITLE: ____Inverting and Non-inverting Amplifier Analysis______ PARTNERS: TA: ___ SECTION: ___501______ DATE PERFORMED: ____07/29/09_______ DATE DUE: ____08/05/09______ DATE RECEIVED: Objective: The goal for the group in Lab 6 is to characterize and measure critical parameters of an inverting and non-inverting LM741 amplifier. The opamp circuits are simulated in PSpice and constructed on a breadboard. The constructed circuit is measured for input and output voltage using a multi-meter. The calculations, PSpice simulation, and breadboard configuration are all compared to verify the resulting values are valid. Introduction: Lab 6 is performed by our group to increase experience with the Pspice software, a multi- meter, and using an opamp. An opamp is a solid-state integrated circuit that uses external feedback to control its functions. Solid-state means that the circuit is built entirely from solid feedback to control its functions....
View Full Document

This note was uploaded on 02/20/2011 for the course ECEL 301 taught by Professor Peters during the Fall '09 term at Drexel.

Page1 / 4

ECEL-301 Lab6 - Drexel University Electrical and Computer...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online