lecture02 - LECTURE 2 Notes prepared by(01 Mehmet Be ş ir...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: LECTURE 2 Notes prepared by : (01) Mehmet Be ş ir Çalkap (02) Merve Okatan References : Chapter 1 of Juvinall Chapters 2 and 3 of Bisplinghoff et al. Solving a Design Problem 1) Determine the applied loading Service/operating loads from full scale experiments, service failure loads 2) Load Analysis using FBD+Laws; determine+reactions+internal forces Æ critical sections 3) Stress analysis Æ critical points 4) Find the critical locations 5) Apply failure criterion Juvinall recommends that problem solutions be organized using the following seven steps (and that we will follow in the class): 1) State briefly what is known; Known or Given 2) State concisely what is to be determined; Find 3) Schematic and the given data; • Sketch the system + free body diagram • Critical points and dimensions on the figure • Record all material data and other parameters 4) Decisions – record your choices/selections (used in design problems mostly) 5) ASSUMPTIONS ; how you model the problem, list all idealizations to reduce the problem to a manageable problem 6) Analysis • Work with the equations as long as possible before substituting numbers • Do additional FBD’s • Check units • Consider magnitudes and numerical values and signs if they seem reasonable...
View Full Document

This note was uploaded on 02/28/2011 for the course AEE 361 taught by Professor Daglas during the Spring '11 term at College of E&ME, NUST.

Page1 / 7

lecture02 - LECTURE 2 Notes prepared by(01 Mehmet Be ş ir...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online