This preview shows pages 1–2. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: See handout for details. In-class exercise part #30 Tool change / home position = X8.0 Z4.0 R.H. turning tool specs: tool # = T0101, Speed = 500, Max speed = 3000 Feed = 0.004 rev/min (rough face) Feed = 0.002 rev/min (finish face) Feed = 0.01 rev/min (rough turn) Feed = 0.003 rev/min (finish turn) R.H. Parting tool spec: tool # = T1212, Speed = 200, Max speed = 1000, Feed = 0.003 rev/min Machining instructions: (a) Use turning tool and canned cycle-facing (G94) to clean up the right end of part (b) Bring tool to 0.05 right of part and .05 above part (c) Reduce diameter of cylinder, taking a 0.05 depth cut with each turn and leaving 0.01 of material from part using canned turning cycle (G90). (d) Bring tool to lead-in position (e) Make the final cut to profile (f) Change to parting tool (g) Use parting tool to make chamfer at left of part as well as to cut of the part. (h) Redo program with turning cycle G71, G70 2...
View Full Document
This note was uploaded on 04/16/2011 for the course ENGR 3330 taught by Professor Turro during the Spring '11 term at UOIT.
- Spring '11