Arranging the Set-Up
Series Circuit Connection
Parallel Circuit Connection
Try ko kaya mag mountain hiking??
Syempre, kain muna para may energy
. Pero ok lng.
. It’s my passion eh.
Ako din friend mo.
. Bakit di mo
Ayaw kita kasing ginawin eh.
After Hiking… Be animal Lover
eeling ko may gumagaya sa akin??
Ikaw ba ang nawawala kong kapatid?
Nilalamig na talga ako
Enjoy ko to,, doing with my friends
yat na rin sa wakas.
. I am the king the WORLD!
The Ohm’s Law states that voltage is proportional to current, at a certain
resistance. These three variables were obtained in a basic dc connection, parallel and series. By using an ammeter and a
VOM, the current flow at each point in the resistor, the voltage, and also the totality of the values was obtained. The set-up
is arranged in such a way that three resistor is present. At each point, the three variables were determined. It is then
compared with the computed value which uses the total sum. The relationship of voltage, resistance and current were
obtained in this experiment. It is found out that for a series connection, the current is constant while for a parallel
connection, it is the voltage. For a series connection, voltage and resistance is summative. On the other hand, for parallel
connection, current is summative, while the resistance is the sum of its reciprocals raised to -1. As we compare the
experimental and computed data, the difference was 13.8% and 8.03%, respectively for series and parallel connection.
Electricity is a major part of our
everyday lives which is usually taken for granted. We
don’t usually realize how dependent we are on electrical
energy until we have a power outage. Like any other
commercial technology, it can be understood if one
starts with some basic concepts which is the purpose of
is the flow of electrical charges between two
points. Most of our everyday applications involve the flow
of electrical charges through a closed loop of electrical
elements called a
. Electrical energy sources exist
which can provide charge flow continuously in a given
direction through a circuit (
direct current or dc
alternating directions at a well defined frequency
alternating current or ac
). The simplest circuit, and best
place to begin the study of electricity, is a dc circuit