This preview shows page 1. Sign up to view the full content.
Unformatted text preview: 6. Dump the generated IP packets into a different File. 7. Use the hex editor (or any other tool) to compare the payload content of the IP packet and the original read file to ensure that the contents were not corrupted. Q3 1. As the final step, read the IP packets data from the generated file, strip off the (IP, TCP and FTP) headers from each packet and reassemble the payload. 2. Compare the reassembled file with the original file and ensure they are the same. Use can use any values within the IP and the TCP header fields. Explain why you chose those values. Make sure the TCP and the IP checksums are properly calculated. Assume that the maximum IP packet size can be of 1400 octets (bytes). Assignment due on February 26, 2009 Page 1 of 1...
View Full Document
This note was uploaded on 05/01/2011 for the course COMPUTER S CSCI 690 taught by Professor K.kazi during the Spring '11 term at New York Institute of Technology-Westbury.
- Spring '11