100%(3)3 out of 3 people found this document helpful
This preview shows page 1 - 3 out of 10 pages.
Lab - Implement EtherChannelPart 1: TopologyAddressing TableDeviceInterfaceIP AddressSubnet MaskS1VLAN 10192.168.10.11218.104.22.168S2VLAN 10192.168.10.12222.214.171.124PC-ANIC192.168.20.32126.96.36.199PC-BNIC192.168.20.42188.8.131.52VLAN TableVLANNameInterface Assigned10ManagementVLAN 1020ClientsS1: F0/6S2: F0/18999Parking_LotS1: F0/3-5, F0/7-24, G0/1-2S2: F0/3-17, F0/19-24, G0/1-21000NativeN/AObjectivesPart 1: Build the Network and Configure Basic Device SettingsPart 2: Create VLANs and Assign Switch PortsPart 3: Configure 802.1Q Trunks between the SwitchesPart 4: Implement and Verify an EtherChannel between the switchesPart 2: Background / ScenarioLink aggregation allows the creation of logical links that are comprised of two or more physical links. Thisprovides increased throughput beyond using only one physical link. Link aggregation also providesredundancy if one of the links fails.In this lab, you will configure EtherChannel, a form of link aggregation used in switched networks. You willconfigure EtherChannel using Link Aggregation Control Protocol (LACP).2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco PublicPage1of10
Lab - Implement EtherChannelNote: LACP is a link aggregation protocol that is defined by IEEE 802.3ad, and it is not associated with anyspecific vendor.LACP allows Cisco switches to manage Ethernet channels between switches that conform to the 802.3adprotocol. You can configure up to 16 ports to form a channel. Eight of the ports are in active mode and theother eight are in standby mode. When any of the active ports fail, a standby port becomes active. Standbymode works only for LACP, not for PAgP.Note: The switches used with CCNA hands-on labs are Cisco Catalyst 2960s with Cisco IOS Release 15.2(2)(lanbasek9 image). Other switches and Cisco IOS versions can be used. Depending on the model and Cisco