3501as2-s09

# 3501as2-s09 - be subjected to 60 cycles at 260 MPa 200...

This preview shows pages 1–2. Sign up to view the full content.

CGN 3501 Homework Assignment No. 2 (Due 3/23/09) Spring 2009 1. The stress-strain diagram of a structural material is given below. Find the following: (A) Elastic modulus. (B) Johnson’s Apparent Elastic Limit. (C) Yield Strength at 0.4% offset. (D) Modulus of Resilience. (E) Modulus of Toughness. (40 pts.) 0 2 4 6 8 10 12 14 16 18 20 STRAIN (10 -3 ) 50 40 30 20 10 0 STRESS (KSI) 2. The S-N diagram of a structural material is shown below. (A) A structural member made of this material is to be subjected to 100,000 cycles of cyclic stress of 150 MPa during its design life. What is the maximum magnitude of an additional steady stress that can be put on top of the cyclic load without fracture during its design life? Use (a) Soderberg's theory, and (b) Goodman’s theory for this problem. (20 pts.) (B) A structural member made of this material is to

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: be subjected to 60 cycles at 260 MPa, 200 cycles at 240 MPa and 500 cycles at 220 MPa per day. Determine the number of days of service before it will fracture according to Minor’s Rule. (20 pts.) σ yield = 320 MPa σ ultimate = 360 MPa 3. A steel bar is connected to an aluminum bar as shown below. At 10 ° C, the stresses in the steel and the aluminum bars are zero. Calculate the stresses in the steel and in the aluminum when the temperature rises to 60 ° C. The properties of the steel and the aluminum are given below. (20 pts.) Steel E s = 30.0 X 10 6 psi α s = 11.7 X 10-6 / ° C Aluminum E al = 10.0 X 10 6 psi α al = 22.3 X 10-6 / ° C 6" 8" Steel Aluminum...
View Full Document

## This note was uploaded on 05/26/2011 for the course CGN 3501 taught by Professor Mang during the Fall '10 term at University of Florida.

### Page1 / 2

3501as2-s09 - be subjected to 60 cycles at 260 MPa 200...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online