old4(1) - Open-Ended Engineering Experimental Project II...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Open-Ended Engineering Experimental Project II EGN 4930 - Foundations of Engineering (Fall 1999) Goal/Purpose Apply some of the fundamentals of engineering to a group experimental project similar to an experiment that a quality engineer would perform at a manufacturing plant to determine the quality of their product. Objective Perform an experiment to evaluate the deflection and stiffness of rubber bands. Specifically, each group will test rubber bands by different manufacturers (two) and different sizes (two). The experiments will also be performed under different environmental conditions (five), that is, • New (out of the package), • Heated (microwave or oven), • Cooled (frozen or iced), • Armor-Alled, and • Fifth condition at each group's discretion. Each group will be responsible for developing an experimental set-up such that data can be accurately taken and replicated. Experimental Parameters, Measurements, and Calculations The following experimental parameters, measurements, and calculations should be closely adhered to:...
View Full Document

This note was uploaded on 06/12/2011 for the course EGN 3000 taught by Professor Staff during the Spring '09 term at University of South Florida.

Ask a homework question - tutors are online