UF-3701_Board_connections

UF-3701_Board_connections - 5. Add power to your...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
University of Florida EEL 3701 Dr. Eric M. Schwartz Department of Electrical & Computer Engineering 18-Jun-10 Page 1/1 Revision 0 Connecting your UF-3701 Board to your Breadboard and your USB-Blaster Connecting your UF-3701 Board to your Breadboard and your USB-Blaster The order of connections between the USB-Blaster, your UF-3701 board, and your breadboard can be important. You should make your connections in the following order. 1. Remove power from your breadboard BEFORE inserting your UF-3701 Board without the USB-Blaster cable plugged in to either your UF-3701 Board or your computer. 2. Insert your UF-3701 Board into your breadboard. 3. Connect the USB-Blaster cable to your UF-3701 Board. 4. Connect the other end of your USB-Blaster cable into your PC.
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 5. Add power to your breadboard. Disconnecting your UF-3701 Board to your Breadboard and your USB-Blaster The order of disconnections between your USB-Blaster, your UF-3701 board, and your breadboard can be important. You should make your disconnections in the following order. 1. Remove power from your breadboard 2. Disconnect your USB-Blaster cable from your PC. 3. Disconnect the USB-Blaster cable to your UF-3701 Board. (You could leave this connected.) 4. Move your UF-3701 board to the proper position on the breadboard. Verify the power and ground connections as well as all other input/output connections. 5. Add power to your breadboard....
View Full Document

This note was uploaded on 07/08/2011 for the course EEL 3701 taught by Professor Lam during the Spring '08 term at University of Florida.

Ask a homework question - tutors are online