Injection Molding 2002

Injection Molding 2002 - EMA 4666C POLYMER PROCESSING...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
1 EMA 4666C POLYMER PROCESSING LABORATORY INJECTION MOLDING PROCESS PURPOSE: To learn the operation of an injection molding and the relationship between mold design and mechanical properties. MATERIALS: Polypropylene EQUIPMENT: Simplomatic Injection Molder Instron Tensile Tester Impact Tester Long Tweezers Safety Glasses Thermocouple Heat resistant gloves PROCEDURE: 1. Turn the machine on and set the temperature controller to 400 ° F. While the machine is heating up, fill the hopper with the polypropylene pellets. Turn the hopper control on (clockwise) and fill the heating chamber. Turn the hopper off when the heating chamber is full. The set temperature is reached once the light on the thermal couple switches from RED to GREEN . Measure and record the temperature of the pellets in the heating chamber. 2. Turn the MOTOR on when the operating temperature is reached. Close the safety shields in front and in the rear of the mold, as well as the shield on the heating chamber. Press the
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

Injection Molding 2002 - EMA 4666C POLYMER PROCESSING...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online