Melt Flow Index 1998

Melt Flow Index 1998 - EMA 4666C POLYMER PROCESSING...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
EMA 4666C POLYMER PROCESSING LABORATORY MELT FLOW INDEX PURPOSE: To familiarize the student with the operation of an extrusion plastometer, and demonstrate the relationship between the melt flow index (MFI) and molar mass. OVERVIEW: The extrusion plastometer is a simple form of capillary rheometer, which is commonly used to compare different grades of the same polymer type. The plastometer itself is simply a heated cylinder that is used to extrude a polymer melt. The cylinder is charged with polymer and held for sufficient time to ensure complete melting. A piston carrying a static weight then loads the charge from above. As the load on the piston drives the melt through a die at the bottom of the cylinder, sections of the extrudate are cut-off at measured time intervals. By definition, the MFI is the mass of extrudate driven through the die in a 10-minute interval. Therefore, the index is an indirect measure of viscosity at specified load/temperature combinations. The principal difference between grades of the same polymer that is reflected in the MFI is molar mass. Because of the inverse proportionality between the MFI and viscosity, in general, polymer grades with a higher melt flow index possess lower molar mass. However, the presence of additives, e.g., plasticizers and impurities, can also affect viscosity and consequently, the MFI. The melt flow index is commonly used by
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 07/17/2011 for the course EMA 4666c taught by Professor Brennan during the Spring '08 term at University of Florida.

Page1 / 3

Melt Flow Index 1998 - EMA 4666C POLYMER PROCESSING...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online