Q T 5 1 3 8 6 V 0 1Network Setup GuideThis manual contains the setup information required to use the machine over wired LAN.If you use the machine with USB connection, refer to your setup sheet.IntroductionTo use the machine connected to a computer, you need to install the software called “MP Drivers” in the computer.The following two connection types are described in this manual.Setting up for use over LANWhen the machine has not been connected to the network, perform this setup to use the machine over LAN. This setup procedure requires settings to be performed on the machine and the computer.ImportantzA hub and LAN cable are required to connect this machine to a LAN. These must be purchased separately.zIf the installation and adjustment of the machine have not been finished, refer to your setup sheet to set up the machine properly.NotezThe configuration and the type of the device vary depending on your network environment. For details, refer to your device’s instruction manual or contact its manufacturer.zIn an office setup, consult your network administrator. NotezTo set up the machine that is not yet connected to a LAN, connect the machine and the computer with a USB cable.zEven if the machine has been set up to be used with the USB connection, follow the setup procedure described in this manual to connect the machine to a LAN for the first time.
2Setting up an additional LAN-connected computerWhen the machine has already been set up to connect to the network using a computer, perform this setup to use the machine from an additional computer over LAN. This setup procedure only requires settings to be performed on the additional computer.Trademark Noticesz“Microsoft” is a registered trademark of Microsoft Corporation.z“Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other countries.z“Windows Vista” is a trademark of Microsoft Corporation.z“Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other countries.
3Confirming the Network EnvironmentzTurn off the firewall function temporarily or change its setting. If you disable the firewall function, disconnect your network from the Internet.zMake sure that the configuration of computers, hubs, and other network devices is complete, and computers can connect to the network.ImportantAfter setup is complete, turn back on any security functions you disabled for setup.If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.NotezFor information on the firewall function of your security software, refer to its instruction manual or contact its manufacturer. zIn an office setup, consult your network administrator.