ITU_BICC - ITU-Q1970: Draft New ITU-T Recommendation Q.1970...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
ITU-Q1970: Draft New ITU-T Recommendation Q.1970 BICC IP Bearer Control Protocol (Geneva, 2001) Summary This Recommendation defines BICC IP Bearer Control Protocol. BICC IP Bearer Control Protocol (IPBCP) is used for the exchange of media stream characteristics, port numbers and IP addresses of the source and sink of a media stream to establish and allow the modification of IP bearers. The information exchanged with IPBCP is done during BICC call establishment. In addition it may be exchanged after a call has been established. IPBCP uses the Session Description Protocol (SDP) defined in RFC 2327 to encode this information. 1.Scope This Recommendation defines IP Bearer Control Protocol (IPBCP), which is suitable for use in IP network environments where the Bearer Independent Call Control (BICC) protocol is deployed. IPBCP can be used also in other environments. BICC IPBCP is used for the exchange of media stream characteristics, port numbers and IP addresses of the source and sink of a media stream to establish and allow the modification of IP bearers. The exchange of information with IPBCP is done during BICC call establishment and after a call has been established. IPBCP uses the Session Description Protocol (SDP) defined in RFC 2327 [10] to encode this information. 2.References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of currently valid ITU-T Recommendations is regularly published. 1. ITU-T Recommendation Q.1901 (2000), Bearer Independent Call Control Protocol, CS1. 2. ITU-T Recommendation Q.1902.1 (2000), Bearer Independent Call Control Protocol (CS2) Functional Description. 3. ITU-T Recommendation Q.1902.2 (2000), Bearer Independent Call Control Protocol (CS2) and Signalling System No. 7 - ISDN User Part General Functions of Messages and Parameters.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
4. ITU-T Recommendation Q.1902.3 (2000), Bearer Independent Call Control Protocol (CS2) and Signalling System No. 7 - ISDN User Part Formats and Codes. 5. ITU-T Recommendation Q.1902.4 (2000), Bearer Independent Call Control Protocol (CS2) Basic Call Procedures. 6. ITU-T Recommendation Q.1902.5 (2000), Exceptions to the Application Transport Mechanism in the Context of Bearer Independent Call Control. 7. ITU-T Recommendation Q.1902.6 (2000), Generic Signalling Procedures and Support of ISDN User Part (ISUP) Supplementary Services with the Bearer Independent Call Control (BICC) Protocol (CS2). 8.
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 11

ITU_BICC - ITU-Q1970: Draft New ITU-T Recommendation Q.1970...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online