90000300_C - 1 Verify kit contents a Verify that your kit contains one each of the following components Shift Software CD Quick Start Guide Digi CM

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Congratulations! You have successfully installed your Digi CM. Configure the device for your application using your browser. To get back to your Digi CM after your initial configuration, enter the IP address in the URL address bar and log in. Use the navigation bar on the left to alter your configuration. From the CD, run the Advance Device Discovery Protocol application to locate the Digi CM on the network. In firmware 1.8 and greater, the CM has SNMP, SSHv1, and Telnet to the command line disabled by default, and http is automatically redirected to https. To perform initial device configuration, use the discovery tool on the CD (also available from the Digi website) or use our straight-thru serial cable with the appropriate adapter to the CM console port, https, or SSHv2 Are you a POWER USER? Use the configuration menu 1.Establish a serial connection through the console port (9600, 8, N, 1). 2.Login as
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 08/08/2011 for the course MICROSOFT 12321 taught by Professor Jack during the Spring '11 term at American International.

Ask a homework question - tutors are online