File Assignment2_solution.pdf

File Assignment2_solution.pdf - ASSIGNMENT NO.2 Assignment...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
ASSIGNMENT NO.2 Assignment problem #1 (20 out of 100) A bar ABC of length L consists of two parts of equal lengths but different diameters. Segment AB has diameter d 1 =100mm and segment BC has diameter d 2 =60mm. Both segments have length L/ 2=0.6m. A longitudinal hole of diameter d is drilled through segment AB for one-half of its length (distance L/ 4=0.3m). The bar is made of plastic having modulus of elasticity E =4.0GPa. Compressive loads P =110kN act at the ends of the bar. If the shortening of the bar is limited to 8mm, what is the maximum allowable diameter d max of the hole? Solution
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Assignment problem #2 (20 out of 100) A uniform bar AB of weight W = 125N is supported by two springs, as shown in the figure. The spring on the left has stiffness 1 300 k = N/m and the natural length L 1 =250mm. The corresponding quantities for the spring on the right are 2 400 k = N/m and L 2 =200mm. The distance between the springs is L =350mm, and the spring on the right is suspended from a support that is distance
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 08/22/2011 for the course ENG 48331 taught by Professor Brown during the Three '11 term at University of Technology, Sydney.

Page1 / 5

File Assignment2_solution.pdf - ASSIGNMENT NO.2 Assignment...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online