3adw000072r0601 dcs600 system description e f

5 options for dcs 600 multidrive converter modules in

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ignals The converter can be connected in 4 different ways to a control unit via analogue/digital links. Only one of the four choices can be used at the same time. In addition to this an extension of I/O´s by SDCS-IOE 1 is possible. SDCS-CON-2 SDCS-CON-2 X17: X17: X2: X3: X4: X2: X1: X5: X6: 1 X7: X3: X4: 2 X1: X5: 1 X3: X1: SDCS-IOB-2 4 Fig. 2.5/1: I/O´s via SDCS-CON-2 Analogue I/O´s: standard Digital I/O´s: not isolated Encoder input: not isolated Fig. 2.5/2: I/O´s via SDCS-CON-2 and SDCS-IOB-2 Analogue I/O´s: standard digital I/O´s: all isolated by means of optocoupler/relay; the signal status is indicated by LED SDCS-CON-2 SDCS-CON-2 X17: X17: X2: X2: X1: X6: X7: 2 X1: X2: X1: SDCS-IOB-3 3 Fig. 2.5/3: I/O´s via SDCS-CON-2 and SDCS-IOB-3 Analogue I/O´s: more input capacity digital I/O´s: not isolated encoder input: isolated current source for: PT100/PTC element X1: X2: X3: X1: SDCS-IOB-3 3 SDCS-IOB-2 4 Fig. 2.5/4: I/O´s via SDCS-IOB-2 and SDCS-IOB-3 Analogue I/O´s: more input capacity digital I/O´s: all isolated by means of optocoupler/relay; the signal status is indicated by LED current source for: PT100/PTC element II F 2-11 3ADW000072R0601 DCS600 System description e f Description of I/O signals SDCS-CON-2 Description of I/O signals SDCS-IOB-2x & SDCS-IOB-3 Mechanical system Mechanical system integrated in control board always external, outside the module Terminals Screw type terminals for finely stranded wires up to 2.5 mm2 Terminals Screw type terminals for finely stranded wires up to 2.5 mm2 Functionality 1 tacho input Resolution: 12 bit + sign; differential input; common mode range ±20 V 3 ranges from 8...30...90...270 VDC with nmax Functionality of SDCS-IOB-3 1 tacho input Resolution: 12 bit + sign; differential input; common mode range ±20 V Range 8 V- with nmax; if higher tacho voltages are in use tacho adaptation board PS 5311 is needed. 4 analogue inputs All as differential inputs; time constant of smoothing capacitor ≤2 ms Input 1: Range -10 V...0...+10 V; -20 mA...0...+20 mA; 4... 20 mA unipolar; RE = 200 kΩ/ 500Ω/ 500Ω; Resolution: 12 bit + sign; common mode range ±20 V Inputs 2+3: Range see input 1, in addition -1 V...0...+1 V RE = 200 kΩ/ 500Ω/ 500Ω/ 20kΩ; Resolution: 11 bit + sign; common mode range with -1 V...0...+1 V range ±10 V, otherwise ±40 V Input 4: Range see input 1 RE = 200 kΩ/ 500Ω/ 500Ω; Resolution: 11 bit + sign; common mode range ±40 V Residual current detection in combination with analogue input 4 (sum of phase currents ≠ 0) 2 outputs +10 V, -10 V; IA ≤ 5 mA; sustained short-circuit-proof voltage supply for reference potentiometer 1 analogue output Bipolar current actual - from power section; decoupled IdN = ±3 V (at gain = 1); IA≤ 5 mA; UAmax = 10 V; gain can be adjusted by means of a potentiometer between 0.5 and 5; short-circuit-proof 2 analogue outputs Range -10...0...+10 V; IA ≤ 5 mA; short-circuit-proof Output signal and scaling can be selected by means of software Resolution: 11 bit + sign Current source for PT 100 or PTC element IA = 5 mA / 1.5 mA 1 pulse generator...
View Full Document

Ask a homework question - tutors are online