3adw000072r0601 dcs600 system description e f

It consists of individual components based on the dcs

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: control DC motors. It consists of individual components, based on the DCS 600 power converter modules. This PLC -Advant control 7 3 NDBU95 Rev D or later Panel CDP 312 -NDPA-02 (PCMCIA) -NDPC-12 -NISA-03 (ISA) PC + DriveWindow ≤ 690V ≤ 1000V 2 DCS 600 MultiDrive Components Overview DCS 600 Armature converter chapter provides a brief description of the DCS 600 MultiDrive components available for matching the drive with the conditions on site. to other drives DCS 600 MultiDrive Components overview for armature converters This overview has been designed to help you to familiarize yourself with the system; its main components are shown in the diagram above. The system’s heart is the DCS 600 converter module. II F 2-1 DCF 600 Field supply converter Legend C1 D1 2 X2 X1 7 IOE 1 5 3 X4 X3 X1 8 8 X4,5 X6 X3 IOB 2x X1 X14 X16 PLC -Advant control 7 3 to other drives DCS 600 MultiDrive Components overview for field supply converters This overview has been designed to help you to familiarize yourself with the system; its main components are shown in the diagram above. The system’s heart is the DCF 600 field supply converter module. II F 2-2 3ADW000072R0601 DCS600 System description e f to the PLC 8 4 X16 (24V) Field Bus Adapter Module Nxxx X1 X2 - Master/ Follower X17 µP X11 X10 CH2 DSP CH0 X33 CH3 NDBU95 IOB 3 X17 X2 X13 X12 PIN 20xB ied PIN 1x dif mo X13 X13 X12 X37 CON 2 V260 AMC-DC X2 DCF 6..-....-.1-15..... X3 X3 Monitoring LED bar NLMD Panel CDP 312 -NDPA-02 (PCMCIA) -NDPC-12 -NISA-03 (ISA) Rev D or later MultiDrive socket NDPI PC + DriveWindow X12 X37 X99 POW 1 T2 F2 ≤ 690V Fig. 2/2: CZD-0x dcf6_sys_h.dsf - detailed description see chapter 7.1 CON 2 - short designation of components M U1 V1 W1 L1 K3 F1 Q1 K5 Earth-fault monitor ≤ 600V EMC filter X16 to a digital input of DCF 600 DCS 600 M C1 D1 X11 X12 DCF 506 7.1 digital input / output analogue input / output optical fibre alternative the modified power interface board SDCS-PIN-1x (if used) and the reduced range of current and voltage types (see table 2.2/2). The function for field supply will be selected by software parameters. Note: Armature and field converters use the same firmware. X4 The DCF 600 field supply converter range is a system of components and complete standard cabinets to control the field supply of DC motors. It consists of individual components, based on the DCS 600 power converter modules. The difference to the armature converter is only 2.1 Environmental Conditions System connection Voltage, 3-phase: Voltage deviation: Rated frequency: Static frequency deviation: Dynamic: frequency range: df/dt: 230 to 1000 V acc. to IEC 60038 ±10% continuous; ±15% short-time * 50 Hz or 60 Hz 50 Hz ±2 %; 60 Hz ±2 % 50 Hz: ±5 Hz; 60 Hz: ± 5 Hz 17 % / s * = 0.5 to 30 cycles. Please note: Special consideration must be taken for voltage deviation in regenerative mode. Degree of protection Converter Module and options (line chokes, fuse holder, field supply unit, etc.): IP 00 Enclosed converters: IP 20/21/31/41 Paint finish...
View Full Document

Ask a homework question - tutors are online