This preview shows page 1. Sign up to view the full content.
Unformatted text preview: ®
Information Wencon Pipe Tape
The instant repair bandage for leaking pipes
- Quick and effective to use
- No mixing – No tools
- Water activated
- Ready for use in 10 seconds – Cures in 10 minutes
- Suitable for all pipes and surfaces No. 2 - 01.07.2007 Wencon Pipe Tape is a fast curing pipe repair bandage especially
formulated to make quick and effective repairs of cracks, leaks,
fractures, and corrosion porosity in piping carrying water, oil,
steam, most gases and even solvents. Wencon Pipe Tape has good
pressure, temperature and chemical resistance.
Wencon Pipe Tape is a pre impregnated fibreglass bandage ready
for use after soaking in water for 10 seconds. After 10 minutes
cure the bandage hardens and the pipe can usually be reactivated.
The bandage is fully cured within 1 hour.
The knitted – non-woven fibreglass structure gives the bandage
maximum strength and facilitates repairs on corner joints, elbows
and other shaped fittings.
Wencon Pipe Tape is available in two standard sizes; 5x150 cm
(60 inch.), designed for pipes up to 50mm (2 inch) diameter and;
5x350cm, (140 inch) designed for pipes up to 125mm (5 inch)
diameter. For larger diameters use a second bandage to complete
Repairs with Wencon Pipe Tape require no tools. Besides the pipe
bandage the package also contains protective gloves and plastic
bags for water.
If the pipe can not be emptied or when high pressure repairs are
required, Wencon Putty can be used to stop the leakage and reinforce the repair.
The Wencon Pipe Repair Kit contains Wencon Putty as well as
repair bandages, gloves and plastic bags. Product numbers:
Wencon Pipe Tape, 5 units (5x150 cm) (2x60 inch) 812344
Wencon Pipe Tape, 4 units (5x350 cm) (2x140 inch) 812348
Wencon Pipe Repair Kit, 2 units/75g (5x150 cm - 2x60 inch + putty)
Wencon Pipe Repair Kit, 5 units/125g (5x150 cm - 2x140 inch+ putty)
WENCON ApS • Jyllandsvej 15 • DK-5400 Bogense • Phone +45 6481 1010
Fax +45 6481 3039 • email@example.com • www.wencon.com Product
WENCON General Description Wencon Pipe Tape is a fast curing pipe repair
bandage especially formulated to make quick
and effective repairs of cracks, leaks, fractures,
and corrosion porosity in piping carrying water,
oil, steam and most gases and solvents. Wencon
Pipe Tape has good pressure, temperature and
chemical resistance. Surface preparation Prepare the surface by cleaning and abrading
the area surrounding the damage.
Degreasing with Wencon Cleaner can improve
adhesion. Machine-ability No post curing machining necessary Technical Data Pipe pressure without Wencon Putty: 10 Bar
(145 p.s.i.) *)
Pipe pressure with Wencon Putty: 50 Bar (725
Flexural strength: ASTM D709 111 N/mmsq.
Tensile strengt: ASTM D638 172 N/mmsq.
Compression strength: ASTM D695 180 N/
mmsq. (25,600 p.s.i.) Mixing Ratio Adhesion at one-inch single overlap: 19 N/
mmsq. Wencon Pipe Tape is pre impregnated with
polyurethane resin and is water activated. Dielectric strength: 16 KV/mm Applying Continuous: 120°C (248°F) No mixing is required Temperature Resistance Select the correct size Wencon Pipe Tape. Peak: 190°C (374°F) Prepare the surface by cleaning and grinding the
area surrounding the damage. Chemical Resistance Stop the leakage with Wencon Putty if necessary. Water, salt water, oil, diluted acids and alkalis. Unpack the Wencon Pipe Tape and soak it in
water for 10 seconds. Shelf life Wrap the Wencon Pipe Tape firmly around the
pipe with 50% overlap. A minimum of 9 complete windings is recommendable. Handling Precautions Continue to smoothen the surface and to apply
pressure to the bandage with a wetted glove,
until it stops bobling and starts to cure. This is
important for closing the pores. Pot Life 3-6 minutes depending on air and water temperature. @ 20°C: 3 years (68°F)
Read the instructions for use and the Material
Safety Data Sheet
REMEMBER TO WEAR GLOVES
*) Laboratory tests have shown much higher values,
but the mentioned values will count for repairs done in
situ. Users are advised to make their own tests if any
doubt. Curing time The bandage hardens in 10 minutes and is fully
cured within 1 hour at 20°C (68°F) WENCON ApS • Jyllandsvej 15 • DK-5400 Bogense • Phone +45 6481 1010
Fax +45 6481 3039 • firstname.lastname@example.org • www.wencon.com ...
View Full Document
This note was uploaded on 08/25/2011 for the course CHEM 101 taught by Professor Krull during the Spring '07 term at Northeastern.
- Spring '07