ECE 3076 - Solutions to IEEE802.11 Wireshark Labs 1. The...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Solutions to IEEE802.11 Wireshark Labs 1. The two access points that are issuing most of the beacon frames have an SSID of “30 Munroe St” and “linsys_SES_24086” 2. The beacon interval for both access points in reported in the Beacon Interval of the 802.11 wireless LAN Magement frane as .1024 seconds (i.e., just over 100 milliseconds). Note that the 30 Munroe St AP beacon frames show up in the trace at this regularity, but the beacons from the linsys_SES_24086 AP do not. 3. The source MAC address on the 30 Munroe St, beacon frame is 00:16:b6:f7:1d:51 4. The destination MAC address on the 30 Munroe St, beacon frame is ff:ff:ff:ff:ff:ff, i.e., the broadcast address. 5. The MAC bssid address on the 30 Munroe St, beacon frame is 00:16:b6:f7:1d:51. Note that this is the same as for the source address (since this is a beacon frame) 6. The support rates are 1.0, 2.0, 5.5, 11.0 Mbps. The extended rates are 6.0, 9.0, 12.0, 18.0, 24.0, 36.0, 48.0 and 54.0 Mbps 7. The TCP SYN is sent at t = 24.811093 seconds into the trace. The MAC address for the host sending the TCP SYN is 00:13:02:d1:b6:4f. The MAC address for
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

ECE 3076 - Solutions to IEEE802.11 Wireshark Labs 1. The...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online