hw10 - radians/sec and Hz? C) What is the impedance of the...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences EE 105 Prof. Pister Spring 2011 Homework Assignment #10 Due in the 105 box on the 2 nd floor of Cory, 5pm Friday 4/15/2010 Razavi 11.4 c and d. Assume that the transistors are biased so that I d =10uA, V dsat =200mV, lambda=1/(10V). CL=100fF. Razavi 11.{6, 33, 42, 57} Problem 3 A) Plot the magnitude of the impedance of a 100uH inductor with 1 Ohm wire resistance over the frequency range from 1 to 100 Mrad/sec. On the same plot, plot the magnitude of the impedance of a 100pF capacitor (and the result from 4B below). (as with all such plots, use log/log axes) B) If you connect the inductor and capacitor in parallel to form an LC tank, what is the resonant frequency in
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: radians/sec and Hz? C) What is the impedance of the inductor at the resonant frequency of the tank? What is the impedance of the capacitor at the resonant frequency of the tank? D) What is the Q of the inductor (the impedance at resonant frequency divided by the wire resistance)? Problem 4: A) Write an expression for the complex impedance of an LC tank with a resistor in series with the inductor. What is the magnitude of the impedance of the tank at resonance? B) Assuming L=100uH, R=1Ohm, and C=100pF, what is the magnitude and phase of the tank impedance at resonance? Add this point to your plot for problem 3A. C) Use spice to plot the magnitude and phase of the impedance of the LC tank in part B. Compare to your hand drawing in problem 1A...
View Full Document

Ask a homework question - tutors are online