EML2322L Quiz 7 - EML 2322L Quiz 7 Name Answer the...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
EML 2322L Quiz 7 (7/6/10) Answer the following questions based on the information presented in the lab and lecture. You can use any form of assistance, including other students. List the acronym and common trade name for the three most common types of electric arc welding (in order of increasing quality): 1. ________________________________________ 2. ________________________________________ 3. ________________________________________ The lathe chuck key should be removed from the chuck after clamping the tool securely: TRUE / FALSE Aluminum should NEVER be cut on the MARVEL bandsaw because it’s setup for steel: TRUE / FALSE Dissimilar metals can be joined using the arc welding process if the proper filler metal is used: TRUE / FALSE The electric motor hardware is metric and is located in the rotisserie next to the storage shelf for the group bins to keep it organized: FALSE / FALSE You must fill out a purchase order for any raw material used in the shop: TRUE / FALSE When connecting the control box to the motors
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 09/05/2011 for the course EML 2322l taught by Professor Staff during the Spring '08 term at University of Florida.

Ask a homework question - tutors are online