1.4.7 Packet Tracer - Configure Router Interfaces(1).docx -...

This preview shows page 1 - 2 out of 2 pages.

Packet Tracer - Configure Router Interfaces Finish the Address Table:Addressing Table Device Interface IP Address/Prefix Default Gateway R1 R1 R1 G0/0 172.16.20.1/25N/A G0/1 172.16.20.129/25N/A S0/0/0 209.165.200.225 /30 N/A PC1 NIC 172.16.20.10/25172.16.20.1PC2 NIC 172.16.20.138/25172.16.20.129R2 R2 R2 R2 G0/0 2001:db8:c0de:12::1/64 N/A G0/1 2001:db8:c0de:13::1/64N/A S0/0/1 S0/0/1 2001:db8:c0de:11::1/64 N/A Fe:80::2N/A PC3 NIC 2001:db8:c0de:12::a/64 Fe:80::2PC4 NIC 2001:db8:c0de:13::a/64Fe:80::2Objectives Part 1: Configure IPv4 Addressing and Verify Connectivity Part 2: Configure IPv6 Addressing and Verify Connectivity Background Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs. Note: The user EXEC password is cisco. The privileged EXEC password is class. Instructions Part 1: Configure IPv4 Addressing and Verify Connectivity

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture