CIS403_Configuring_switch_port_security

CIS403_Configuring_switch_port_security - Configuring Port...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
Configuring Port Security Objective Create and verify a basic switch configuration. Configure port security on individual FastEthernet ports. Background/Preparation Cable a network similar to the one in the diagram. The configuration output used in this lab is produced from a 2950 series switch. Any other switch used may produce different output. The following steps are intended to be executed on each switch unless specifically instructed otherwise. Step 1 Configure the switch Configure the hostname, access and command mode passwords, as well as the management LAN settings. These values are shown in the chart. Step 2 Configure the hosts attached to the switch a. Configure the hosts to use the same IP subnet for the address, mask, and default gateway as on the switch. b. There is a third host needed for this lab. It needs to be configured with the address 192.168.1.7. The subnet mask is 255.255.255.0 and the default gateway is 192.168.1.1. Note: Do not connect this PC to the switch yet. Step 3 Verify connectivity a. To verify that hosts and switch are correctly configured, ping the switch IP address from the hosts. b. Were the pings successful? __________________ yes__________________________ c. If the answer is no, troubleshoot the hosts and switch configurations.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Step 4 Record the host MAC addresses a. Determine and record the layer 2 addresses of the PC network interface cards. If running Windows 98, check by using Start > Run > winipcfg . Click on More info . If running Windows 2000, check by using
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 4

CIS403_Configuring_switch_port_security - Configuring Port...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online