Chapter 07 - Chapter 7 Worksheet 1 Name _ Date _ Mechanical...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
Chapter 7 Worksheet 1 Name ________________________________________________ Date ___________________ Mechanical Control System Adjustments Upon completion of this worksheet, you should be able to diagnose mechanical and vacuum control systems and determine the need for repairs. Objective: Classroom Manual 1 Tools and Materials Service manual Basic tool set Procedures Task completed 1. You are given a vehicle using mechanical linkage to control shifting. 2. Identify the type of linkage and adjustment procedures. Type ___________________________________________________________________ Procedures _______________________________________________________________ 3. Raise the vehicle, if necessary, to access the adjustment mechanism. 4. Inspect the linkage for damage or binding. Repair as needed. 5. Unlock or loosen the linkage locking mechanism. 6. Measure and adjust the linkage to specifications. 7. Prepare the vehicle for a road test and road test with your instructor. 8. Record your road test results. Determine if further repairs are needed. ________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ Instructor’s Response ___________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Chapter 7 Worksheet 2 Name ________________________________________________ Date ___________________ Inspecting, Adjusting, and Replacing Vacuum Modulators, Lines, and Hoses Upon completion of this worksheet, you should be able to service the modulator, lines, and hoses. Objective: Classroom Manual 2 Tools and Materials Basic tool set Service manual Vacuum gauge Procedures Task completed 1. You are given a vehicle with vacuum control shifting. 2. Raise the vehicle to gain access to the vacuum modulator. 3. Locate and disconnect the vacuum hose at the modulator. 4. Inspect the hose for transmission fluid. Fluid present; Yes No If yes, what is your next step? _______________________________________________ ________________________________________________________________________ 5. Install the vacuum gauge into the hose, start the engine, and record vacuum. Are the vacuum readings within specifications? Yes No If no, what is the next step? __________________________________________________ Determine corrective action. _________________________________________________ 6. If vacuum is correct, check the modulator for possible manual adjustment. Consult the service manual and make corrective adjustments if possible. 7.
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 09/13/2011 for the course AUTOMOTIVE 241 taught by Professor Saxton during the Spring '11 term at Community College of Philadelphia.

Page1 / 6

Chapter 07 - Chapter 7 Worksheet 1 Name _ Date _ Mechanical...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online