52.pdf - Technical Data Hardtop XP Product description A two-pack high solid aliphatic polyurethane topcoat with excellent gloss and colour retention

52.pdf - Technical Data Hardtop XP Product description A...

This preview shows page 1 - 3 out of 3 pages.

Hardtop XP Page 1 of 3 Technical Data Hardtop XP Product description A two-pack high solid, aliphatic polyurethane topcoat with excellent gloss and colour retention. Hardtop XP bases are intermediates and need to be processed before use. Recommended use As a glossy topcoat over most epoxy systems where a durable, weather-resistant finish is required in a wide range of aggressive atmospheres. Film thickness and spreading rate Minimum Maximum Typical Film thickness, dry (μm) 40 100 60 Film thickness, wet (μm) 65 160 95 Theoretical spreading rate (m²/l) 15,8 6,3 10,5 Physical properties Colour According to colour card and Multicolor tinting system (MCI) Solids (vol %)* 63 ± 2 Flash point 30ºC ± 2 (Setaflash) VOC 2,8 lbs/gal (336 gms/ltr) USA-EPA Method 24 320 gms/ltr UK-PG6/23(97). Appendix 3 Gloss Glossy Gloss retention Excellent Water resistance Very good Abrasion resistance Very good Solvent resistance Very good Chemical resistance Very good Flexibility Very good *Measured according to ISO 3233:1998 (E) Surface preparation All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504. Coated surfaces Clean, dry and undamaged compatible primer. Please contact your local Jotun office for more information. Other surfaces The coating may be used on other substrates. Please contact your local Jotun office for more information.
Image of page 1
Hardtop XP Page 2 of 3
Image of page 2
Image of page 3

You've reached the end of your free preview.

Want to read all 3 pages?

  • Spring '18
  • Material safety data sheet