Unit 3 Instructions.docx - Instructions After your initial...

This preview shows page 1 - 2 out of 2 pages.

Instructions After your initial review of the operations and safety data sheets (SDS), you have determined the sampling you want to perform at Acme Automotive Parts (AAP). The table below lists hazards you want to sample and the sampling/analytical methods you decide to use. You can access the National Institute for Occupational Safety and Health (NIOSH) methods at and the Occupational Safety and Health Administration (OSHA) methods at . Hazard Possible MethodOccupational Exposure Limits (OEL) Manganese Fume (Welding) NIOSH 7302 5 mg/m 3 (OSHA Ceiling) Copper Fume (Welding) NIOSH 7302 0.1 mg/m 3 (OSHA 8-hour TWA) Lead Fume (Welding) NIOSH 7302 0.05 mg/m 3 (OSHA 8-hour TWA) 1,2,4 trimethylbenzene (Paint) OSHA 1020 25 ppm (ACGIH 8-hour TWA TLV) Toluene (Paint) OSHA 111 50 ppm (ACGIH 8-hour TWA TLV) Xylene (Paint) OSHA 1002 100 ppm (OSHA 8-hour TWA) Metal Working Fluids NIOSH 5524 0.5 mg/m 3 (NIOSH 10-hour TWA REL) Noise (throughout plant) None 90 dBA (OSHA 8-hour TWA)

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture