Design of Analog CMOS Integrated Circuits Behzad Razavi Errata in Problem Sets Chapter 2 In Eq. (2.44), must be in the numerator. Chapter 3 Call the third problem 3.2’. In Problem 3.2, Fig. 3.68(d), change the gate voltage of 2 to 2 . In Problem 3.4, Fig. 3.71(a), change the gate voltage of 1to 1 . In Fig. 3.72(e), 1 must be changed to . In Fig. 3.73(h), the output is at the source of 2 . In Problem 3.10(c), the question must be phrased as: Which device enters the triode region ﬁrst as falls? In Problem 3.13, ﬁrst sentence should read: . .. with 500 5 ... In Problem 3.16(a), do not neglect channel-length modula-tion in the triode region. Chapter 4 In Problem 4.2, assume 1 mA and change part (a) to: Determine the voltage gain. In Problem 4.6, assume 0. In Problem 4.9, assume 0. In Problem 4.11, assume 5 20 A. In Problem 4.13, change the ﬁgure number to 4.8(a). Chapter 5 In Problem 5.16(d), assume does not vary with tem-perature. Chapter 6
This is the end of the preview. Sign up
access the rest of the document.
This note was uploaded on 10/02/2011 for the course 334323 232 at Stanford.