PC600_1000 - 20 10 OWNER’S MANUAL Pe l ic an W at er Te...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 20 10 OWNER’S MANUAL Pe l ic an W at er Te ch no lo gi es , In c Pelican PC600/PC1000 Premium Whole House Water Filter Pelican Water Technologies, Inc.® An Advanced Water Technology Company PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter W at er Te ch no lo gi es , In c 20 10 Page 2 © Copyright 2010 Pelican Water Technologies, Inc.® All rights reserved. Pe l ic an All information contained herein is the property of Pelican Water Technologies, Inc. Pelican Water Technologies, Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Pelican Water Technologies, Inc. shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information is provided “as is” without warranty of any kind and is subject to change without notice. This document contains proprietary information which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Pelican Water Technologies, Inc. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 3 Table of Contents 20 10 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Operation and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Complete Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Te ch no lo gi es , In c Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hose Bib Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Elbow Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bypass Valve Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Carbon Tank Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Carbon Tank Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Pre-Filter Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Pre-Filter Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Whole House Water Filter Tank Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Complete the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Premium Whole House Water Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Sediment Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Replacing the Sediment Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pe l ic an W at er Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Manufacturer’s 10 Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Manufacturer’s Performance Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Warranty Registration Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 4 Product Operation and Specifications PC600 PC1000 Rated Service Flow* 8 GPM (10 GPM Peak) 12 GPM (16 GPM Peak) Minimum Working Pressure 25 PSI Maximum Working Pressure 80 PSI Maximum Vacuum 5 inch/127 mm Hg Operating Temperatures 36°F – 120°F pH Range 6 – 11 Te ch no lo gi es , In c 20 10 Specification Description Important Information Read these instructions carefully and determine the location of all system components before beginning installation. Check all applicable plumbing, building, and electrical codes for installation compliance. Install the system on the main water supply. Electrical Notice: W at er If this or any other system is installed in a metal (conductive) plumbing system, i.e. copper or galvanized metal, the plastic components of the system will interrupt the continuity of the plumbing system. As a result any errant electricity from improperly grounded appliances downstream or potential galvanic activity in the plumbing system can no longer ground through contiguous metal plumbing. Older homes may have been built in accordance with building codes from decades ago, some of which actually encouraged the grounding of electrical appliances through the plumbing system. Consequently, we highly recommend either the installation of a bypass consisting of the same material as the existing plumbing, or a grounded "jumper wire" bridging the equipment and re-establishing the contiguous conductive nature of the plumbing system. CAUTION: Pe l ic an When adding a filtration/softening system to homes/buildings supplied by well water, the system should be installed following the pressure tank. DO NOT USE this system for pneumatic or hydro pneumatic applications. If you are using a booster pump, then install this system following the booster pump. If you have questions, please call customer service. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 5 Complete Parts List 20 10 Note: Pelican supplies the parts below to accommodate a variety of water supply lines. Not all parts will be used. Table 1: Parts List Description Qty. 1" Brass Sweat Assembly: W3007-02 WS1 Fitting 1" Brass Sweat Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and Brass Sweat (2) Description Qty. 1 Bag 1" PVC Elbow Assembly: 1 Bag ¾" PVC Solvent Assembly: V3007 WS1 Fitting 1" PVC Male NPT Elbow Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and 90° Elbows (2) Te ch no lo gi es , ¾" Brass Sweat Assembly: Part W3007-03 WS1 Fitting ¾" Brass Sweat Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and Brass Sweat (2) PVC Female Hose Adapter: V3007-01 WS1 Fitting ¾" to 1" PVC Solvent 90° Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and 90° Elbows (2) 1 PVC Male Hose Adapter: 1" to 1" Female Threaded Adapter Pre-Filter System: 1 Bag In c Part 1 Bag 1 PVC 1" Female to ¾" Threaded Male Adapter 1 PP5 Big Blue Pre-Filter Housing, Mounting Bracket, Phillips Head Screws (4), Bolt Head Screws (4), and Washers (4) Bypass Valve: 1 T In/Out Bypass Valve with Red Arrow Handles 1 Pre-Filter Wrench 1 Pelican Whole House Water Filter 1 ic an W at er Sediment Filter: PC40-1 5 Micron Poly-Spun Sediment Filter Pe l Note: Drawings are not to scale. Additional fittings will be needed to adapt to your plumbing. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 6 Installation Overview Wall 20 10 Wall IN OUT Pre-Filter Figure 1 19" DOWNFLOW INLET Te ch no lo gi es , UPFLOW INLET © 2010 In c Outgoing Water to House Incoming Water Supply Whole House Water Filter Pre-Installation W at er Hose Bib Assembly PVC Female Hose Adapter PVC Male Hose Adapter © 2010 Pelican Water Technologies, Inc.® Figure 2 Pe l ic an Attach the PVC Male Hose Adapter to the PVC Female Hose Adapter. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 7 Elbow Assembly Quick Connect Nut 20 10 Place Split Ring here Place O-Ring here 1" PVC Elbow Split Ring O-Ring In c Hose Bib Assembly © 2010 Figure 3 Te ch no lo gi es , 1. Place a Quick Connect Nut onto the 1" PVC Elbow. The threads of the Quick Connect Nut should point towards the opening of the 1" PVC Elbow. 2. Attach the Split Ring into the Groove onto the 1" PVC Elbow. 3. Place the O-Ring in the Groove onto the edge of the 1" PVC Elbow. 4. Thread the Hose Bib Assembly onto the 1" PVC Elbow Assembly. Bypass Valve Installation Red Arrow DOWNFLOW INLET W at er UPFLOW INLET Water Filter Head T Quick Connect Nut Whole House Water Filter Figure 4 ic an The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick Connect Nuts. Push the Bypass Valve into the head of the Whole House Water Filter with the unthreaded ends oriented toward the tanks and hand-tighten the Quick Connect Nuts. Notice: Pe l The arrows on the Bypass Valve may be pointing in a different direction than shown in the Figure. If this is the case, remove the red arrows by pulling them straight up. Turn them around and reposition correctly onto the Bypasws Valve so they are positioned as shown in the Figure. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 8 Carbon Tank Soak 20 10 !IMPORTANT! Your system will not be ready for use for a minimum of 48 hours while the Carbon Soak process takes place. Please plan your installation accordingly. Notice: Quick Connect Nut Water Hose Bib Assembly Te ch no lo gi es , Garden Hose In c Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of steps in a location suitable for water flow. UPFLOW INLET DOWNFLOW INLET Bypass Valve Whole House Water Filter © 2010 Figure 5 1. Attach a garden hose to the Hose Bib Assembly. 2. Connect the 1” PVC Elbow Assembly to the upflow inlet side of the Bypass Valve and handtighten the Quick Connect Nut to the 1” PVC Elbow Assembly. W at er 3. Fill the Pelican Whole House Water Filter Tank full until water comes out of downflow inlet side of the Bypass Valve. 4. Turn the water off. 5. Remove the garden hose from the Hose Bib Assembly. Do not remove the fitting. Pe l ic an 6. Allow the carbon tank to soak for at least 48 hours prior to tank installation. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 9 !IMPORTANT! Do not perform the Carbon Tank Wash until the Carbon Tank Soak process is complete. Notice: 20 10 Carbon Tank Wash Elbow Assembly Water Hose Bib Assembly In c Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of steps in a location suitable for water flow. Bypass Valve UPFLOW INLET DOWNFLOW INLET Te ch no lo gi es , Garden Hose Whole House Water Filter © 2010 Figure 6 1. Reattach the garden hose to the Hose Bib Assembly. 2. Slowly turn on the water 1/4 turn for this entire process. 3. Run water through the upflow inlet side of the Bypass Valve for 15-30 minutes or until the water discharging from the downflow inlet side of the Bypass Valve runs clear. 4. Turn off the water. W at er 5. Remove the 1” PVC Elbow Assembly and Hose Bib Assembly from the upflow inlet side and attach it to the downflow inlet side of the Bypass Valve. 6. Run the water through the downflow inlet side for 1 minute or until water runs clear. 7. Turn off the water. 8. Remove the 1” PVC Elbow Assembly from the Bypass Valve and disconnect the garden hose. Pe l ic an Note: Please save the Hose Bib Assembly as this will be used in the future for the carbon exchange. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 10 Pre-Filter Assembly Pre-Filter Cover Red Pressure Release Button Sediment Filter O-Ring In c Blue Pre-Filter Housing 20 10 Installation Stand Pipe Figure 7 Te ch no lo gi es , © 2010 1. Unscrew the cover from the Blue Pre-Filter Housing. 2. Remove the plastic covering from the Sediment Filter. 3. Place the Sediment Filter onto the Stand Pipe in the Blue Pre-Filter Housing. 4. Screw the cover onto the Blue Pre-Filter Housing until hand-tight. Pre-Filter Installation Mounting Bracket W at er Inlet Water Supply © 2010 Top View Pre-Filter Blue Pre-Filter Housing Figure 8 1. Shut off the water. 2. Attach the Mounting Bracket to the wall using the supplied Phillips Head Screws and Washers. ic an 3. Attach the Pre-Filter System to the Mounting Bracket using the supplied Bolt Head Screws. 4. Tighten the Blue Pre-Filter Housing using the supplied Pre-Filter Wrench (counter clockwise). Pe l 5. Determine the size of your inlet water supply line. PVC Reducers may be needed to fit the 1” PreFilter System. Notice: The Pre-Filter Housing comes with a 1” threaded female inlet/outlet and will require additional fittings to adapt to your plumbing. A shut-off valve is recommended prior to the Pre-Filter System. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 11 Whole House Water Filter Tank Installation 1. Level the Pelican Whole House Water Filter. 20 10 Notice: If the tank is not level, lift the tank up and drop it on the ground until the tank stands vertical. The bottom of the tank is round and the boot allows the tank to stand upright. Note: Pre-Filter In c PVC Fitting* Outgoing Water to House Te ch no lo gi es , Incoming Water Supply UPFLOW INLET Whole House Water Filter DOWNFLOW INLET T Bypass Valve * Choose appropriate connection Figure 9 2. Determine the size and material of your incoming water supply line from the Pre-Filter System and choose the appropriate fittings required to connect it to the Bypass Valve. CAUTION: Do not over-tighten any of the fittings during installation. All fittings should be hand-tight. Table 2: Bypass Valve Fittings Description Qty. 1" Brass Sweat Assembly: W3007-02 WS1 Fitting 1" Brass Sweat Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and Brass Sweat (2) ic an Part W at er Note: The fittings below are designed with a ¼" give to allow for proper pipe alignment. They will not leak and are intended to have some flexibility. Pe l ¾" Brass Sweat Assembly: W300703 WS1 Fitting ¾" Brass Sweat Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and Brass Sweat (2) Part Description Qty. 1 bag 1" PVC Elbow Assembly: V3007 WS1 Fitting 1" PVC Male NPT Elbow Assembly (2): O-Rings (2), Snap Rings (2), Connectors (2), and 90° Elbows (2) 1 bag 1 bag ¾" PVC Solvent Assembly: V3007-01 WS1 Fitting ¾" to 1” PVC Solvent 90° Assembly (2): ORings (2), Snap Rings (2), Connectors (2), and 90° Elbows (2) 1 bag 3. Install the fittings onto the upflow and downflow inlet sides of the Bypass Valve. Follow the diagrams supplied with the fittings. 4. Connect the incoming water supply from the Pre-Filter System to the fitting on the upflow inlet side of the Bypass Valve. 5. Connect the outgoing water supply to the downflow inlet side of the Bypass Valve. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 12 Complete the Installation 20 10 1. Turn on the main water supply. 2. Check for leaks. 3. Peel off the protective plastic wrap from the chrome tank jackets. Notice: In c Avoid high flow rates (such as bath tubs or multi-head showers) for the first 72 hours to avoid flow restriction caused by carbon blockage of the top basket inside the carbon tank. Notice: Pe l ic an W at er Te ch no lo gi es , Carbon dust may be released into the water lines of the house/building during the first few days of water use after carbon tank installation. The carbon dust is harmless, but may give the water a gray appearance that should disappear within a week. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 13 Care and Cleaning 20 10 Premium Whole House Water Filter Your Pelican PC600/PC1000 Premium Whole House Water Filter requires care and cleaning after a period of 5 years. Replacement media and instructions can be ordered on-line at www.pelicanwater.com or by calling 866-767-6401. Sediment Filter In c It is recommended that the Sediment Filter be replaced every 6-9 months depending on the amount of sediment present in the water supply. If the system has been working properly and the pressure is slowing, it may be time to change the Sediment Filter. Check the Sediment Filter and replace if necessary. Replacing the Sediment Filter Te ch no lo gi es , Red Pressure Release Button Pre-Filter Cover Sediment Filter O-Ring Blue Pre-Filter Housing Stand Pipe © 2010 Figure 10 1. Turn off the water supply to the Pre-Filter System. 2. Run a faucet (cold water) inside the house to relieve the pressure. 3. Unscrew the Blue Pre-Filter Housing clockwise using the supplied Pre-Filter Wrench. 4. Remove the existing Sediment Filter and discard. W at er 5. Remove the O-Ring and wipe the groove and O-Ring clean. Lubricate the O-Ring with a coating of clean silicone grease. Replace O-Ring and press the O-Ring down into the groove with two fingers. Note: This step is important to ensure the proper filter seal. Make sure the O-Ring is seated level in the groove. If the O-Ring appears damaged, stretched, or crimped it should be replaced at this time. 6. Place a new Sediment Filter onto the Stand Pipe in the Blue Pre-Filter Housing. 7. Screw the Blue Pre-Filter Housing onto the Pre-Filter Cover until hand-tight. ic an 8. Turn on water supply slowly to allow the Pre-Filter System to fill with water. 9. Press the Red Pressure Release Button to release trapped air from filter. Pe l 10. Check for leaks. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 14 Troubleshooting Solution Water leaking at the top of the tank around the head. You may need to turn the head to tighten it. The tank head is pre-installed hand-tight, do not overtighten the head (just turn it snug). The tank leans to one side or is not level. If the tank is not level, lift the tank up and drop it on the ground until the tank stands vertical. The bottom of the tank is round and the boot allows the tank to stand upright. Water pressure is slowing. It is recommended that the Sediment Filter be replaced every 6-9 months depending on the amount of sediment present in the water supply. If the system has been working properly and the pressure is slowing, it may be time to change the Sediment Filter. Check the Sediment Filter and replace if necessary. Te ch no lo gi es , In c 20 10 Problem Push down on the red button several times until the water stops leaking. Pe l ic an W at er Water leaks around red Pre-Filter button. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 15 Warranty 20 10 Manufacturer’s 10 Year Warranty Manufacturer’s 10 year warranty on all the filter housings, tank heads, and the bypass valves against manufactures defects. In c Note: Manufacturer’s warranty and performance guarantees do not cover acts of God, misuse or abuse. All products must be used in accordance to the specific application. All warranties and performance guarantees are valid to the original purchases and purchasers delivery location. Labor and or cost of damage due to misuse or defective items are the responsibility of the purchaser. Te ch no lo gi es , If you have not had a water test done before purchasing a system, a certified water test may be required for any warranty claims. Should your water test show contaminates unknown at the time of purchase or unknown to Pelican, this may void your warranty. Please contact your authorized Pelican dealer for further details. Pelican Water Technologies or its Authorized Dealers will not be liable for any circumstance for consequential or incidental damages. In any dispute between the Manufacturer and Purchaser regarding products sold under this warranty, for the purpose of court litigation, jurisdiction and venue over the parties and the subject matter of the dispute shall be with the circuit/county court of Volusia County, Florida, U.S.A. The prevailing party in any such litigation shall be entitled to an award of reasonable attorney’s fees and costs. It is the purchaser’s responsibility to insure that the equipment is installed in compliance with all applicable building codes both local and state. Manufacturer’s Performance Guarantee Pe l ic an W at er The Pelican PC600 Premium Whole House Water Filter is guaranteed to perform for 600,000 gallons or (5) years whichever comes first. The Pelican PC1000 Premium Whole House Water Filter is guaranteed to perform for 1,000,000 gallons or (5) years whichever comes first. The authorized dealers shall be responsible for the repair or replacement of defective media only, labor to replace the media is the responsibility of the purchaser. © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C — Pelican PC600/PC1000 Premium Whole House Water Filter Page 16 Warranty Registration Form 20 10 Send in this Warranty Registration Form to validate your warranty or visit www.PelicanWaterTechnologies.com to complete warranty registration form. Name: Address: City: Order ID#: State: Send To: Model: Te ch no lo gi es , Date Item(s) were Received: In c Pelican Warranty Registration Form Zip: Pelican Water Technologies 3060 Performance Circle, Suite 2 DeLand, FL 32724 Phone: 1-(866) 767-6401 W at er Plumber’s Information (optional) We like to recommend good plumbers throughout the USA and if you were happy with your installer please give us their information so we can pass it on as a courtesy. Thank you for your time. ic an Name of Plumbing Company used to install system: _____________________________________ Pe l Phone #: (_____)-__________________ of the Plumbing installer © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 PC600-1000 Rev C— Pelican PC600/PC1000 Premium Whole House Water Filter Page 17 20 10 !IMPORTANT! Do not use where water is microbiologically unsafe or with water of unknown quality without proper disinfection before or after the filter/softener system. Product Certifications In c Pelican 5 Micron Pre-Filter System – NSF/ANSI Certified Standard 42 for material and st ructural integrity requirements Te ch no lo gi es , Clack V3007-xx Bypass Fittings – WWQA Gold Seal Certified to NSF/ANSI Standard 44 for material safety and structural integrity only Pe l ic an W at er U.S. Green Building Council © 2010 Pelican Water Technologies, Inc. ® 3060 Performance Circle, Suite 2, DeLand, FL 32724 www. pelicanwater.com (866) 767-6401 ...
View Full Document

This note was uploaded on 10/03/2010 for the course UNKNOWN 555 taught by Professor Erfef during the Spring '10 term at École Normale Supérieure.

Ask a homework question - tutors are online