EML2322L Quiz 2 - EML2322L Quiz 2 (9/6/11) Answer the...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
EML2322L Quiz 2 (9/6/11) Answer the following questions based on the information presented in the lab and lecture. Unless instructed otherwise, you can use any notes but do not discuss this information with other students. It is acceptable to leave a machine running: A. When cleaning the machine B. When changing tools C. When clamping the workpiece D. When measuring your workpiece E. When touching off to locate the reference point on the workpiece The maximum allowable material which can removed in a single pass on the mill or lathe is: A. Five thousands of an inch (0.005”) B. Fifty thousands of an inch (0.050”) C. Five tenths of an inch (0.500”) D. Five inches (5.000”) E. None of the above Which of the following rules does NOT apply when using the milling machine: A. Don’t touch any part of the workpiece or machine spindle while the tool is rotating B. Remove the parallels after clamping the workpiece securely in the vice C. Use only tapered shank tools in the mill collets D. Adjust the spindle speed while the machine
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 10/18/2011 for the course EML 2023L taught by Professor M.braddock during the Spring '11 term at University of Florida.

Ask a homework question - tutors are online