Unformatted text preview: 2. Use a ____________________ to accurately locate and begin drilling the hole 3. Use a ____________________ to drill the initial (or pilot) hole through the part 3. Use a ____________________ to drill the intermediate hole through the part 4. Use a ____________________ (of size __________ ) to finish drilling the hole to final size for threading 5. Load a ____________________ into the spindle to ensure the hole is tapped normal to the part’s surface 6. Thread the hole using a ____________________ , tap handle and cutting oil...
View Full Document
This note was uploaded on 10/18/2011 for the course EML 2023L taught by Professor M.braddock during the Spring '11 term at University of Florida.
- Spring '11