89_HWKTTE 4004c - 79 freeze). For all the cases, the...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
79 freeze). For all the cases, the dynamic load test closer to the static load test was performed after the load test (i.e. the static capacity was compared to the Beginning of Restrike). Other requirements include having a measured skin capacity by mean of a pull out static load test or Osterberg load cell test. For each pile, it was required to know both geometric and driving parameters, such as, wave speed, pile length below the gages, cross-sectional area, and material modulus. Based on the latter requirements, 18 test pile were considered. Table 7-1 summarizes general information of each load test pile. The pile population represents 9 sites and 3 diameters, while the range of depths of the piles below the gages varies from 9.15 to 34.45 meters. Only one test pile is from a location outside the State of Florida. Automating the Suggested Method A Fortran program was developed in order to simplify the calculation process.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

89_HWKTTE 4004c - 79 freeze). For all the cases, the...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online