EE2005-Tutorial02

# EE2005-Tutorial02 - NATIONAL UNIVERSITY of SINGAPORE...

This preview shows pages 1–2. Sign up to view the full content.

NATIONAL UNIVERSITY of SINGAPORE Department of Electrical and Computer Engineering EE2005 – Electronics Tutorial 2 1. The electrical characteristics of a diode is given by ( ) ( ) 1 / = T D nV V S D e I I where I S = 7.937×10 -8 mA, and n = 1.737. (a) The diode is connected in series with a 2 k Ω resistor as shown in Fig. Q1. Use the constant-voltage-drop model to estimate the value of I D and V D . (b) Using the exponential diode equation, obtain an accurate solution for I D and V D by iteration. This is the bias point. (c) The voltage at node A is momentarily changed from 5.000V to 5.100 V, i.e. v dd = 0.100 V. Solve for the current through the diode and the voltage across the diode b y i t e r a t i o n . (d) The voltage at node A is momentarily changed from 5.0V to 4.900 V, i.e. v dd = -0.100 V. Solve for the current through the diode and the voltage across the diode b y i t e r a t i o n . In parts (b) to (d), please ensure that the calculated voltage across the diode is accurate to 4 decimal places or 0.0001 V. (e) If the change in the voltage at node A is v dd , and the resulting change in the solutions for V D and I D are v d and i d , respectively, obtain the ratio v d / i d using the results in (b) to (d).

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

### Page1 / 5

EE2005-Tutorial02 - NATIONAL UNIVERSITY of SINGAPORE...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online