ECE230_S11_Lab01_Readme

ECE230_S11_Lab01_Readme - Digital Systems Laboratory Lab 1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Digital Systems Laboratory Lab 1 ECE230L Spring 2011 Boise State University Electrical and Computer Engineering Department Page 1 of 2 Lab 1: Introduction to Digital Systems Laboratory Objectives: This lab is intended to help you get familiar with implementation of the circuits (synthesis) that you create in Xilinx. This and several following labs utilize the BSU proto-board for this purpose. In this lab, you will work with digital logic components to implement the circuit from Lab 0. Lab Details: 1.0 Inventory The prototyping kit includes: BSU proto-board. The BSU proto-board is made up of a breadboard (Elenco Precision Model 9438), with a three BSU pre-assembled modules mounted on the board: a power module, a switch module, and a logic module. Power supply (wall wart) A box of 7400-series standard chips, 3.3 volt versions (contains a total of 16 chips, including 2 each AND - 2 and 3 input, OR, NAND - 2 and 3 input, NOR, XOR, and inverter) Wire strippers Verify that all listed equipment is in your kit, and so indicate by initialing on the provided check-off...
View Full Document

Page1 / 2

ECE230_S11_Lab01_Readme - Digital Systems Laboratory Lab 1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online