ECE230_S11_Lab6_Readme

ECE230_S11_Lab6_Readme - Lab 6 Digital Systems Laboratory...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Digital Systems Laboratory Lab 6 ECE230L – Spring 2011 Boise State University Electrical and Computer Engineering Department Page 1 of 2 Lab 6: Arithmetic Unit Objective: Design, build, and test an adder/subtractor unit Lab Details: In class lecture, you have been shown how to build a larger functional unit using a basic module (with functionality verified). In this lab, you will apply a similar process to build an arithmetic unit with add and subtract functions. This arithmetic unit is to be controlled using just one control bit. Let’s call this control signal add / sub . When add / sub is 0, the arithmetic unit will add . Otherwise, it will function as a subtractor . Use of the arithmetic units in the Xilinx ISE libraries are not allowed. Tasks : 1. Pre-lab: Create a document with test values needed for Task 5 and bring to lab. Check-off: ________________ 2. Design a full-adder for addition of two 1-bit numbers. 3.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

ECE230_S11_Lab6_Readme - Lab 6 Digital Systems Laboratory...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online