ropesetup - direction you are moving. Warning :...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Turning and Jumping Turning Heel Side Turn 1. Keep the rope at your hip. 2. Move your front leg towards the heel side of the board. 3. Slightly lean on the heelside edge of the board. Toe Side Turn 1. Again keep the rope at your hip. 2. Move your front leg toward the toe side of the board. 3. Slightly lean on the toe side edge of your board and push your back leg towards the heel side of your board. Jumping 1. Ride the board outside the wake and into the flats 2. Then point your board towards the wake. 3. Ride the edge of your board towards the wake. 4. Jump when you get to the top of the wake. 5. Look towards the horizon and point the board in the
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: direction you are moving. Warning : Faceplanting may occur. Rope Setup 1. Unroll the rope and decide what length you want the rope to be set at. The shorter the rope the bigger the wake. 2. Once the length is decided, there should be a hole at the desired length. Put your hands on both sides of this hole. 3. Bring the side closest to the handle through the hole. 4. Make a loop with the rope you put through the hole and place this loop over the eye of the ski tower. 5. Pull tight, and now you are ready to ski! 11 8...
View Full Document

This document was uploaded on 11/01/2011 for the course ENC 3254 at University of Florida.

Ask a homework question - tutors are online