projddhar

projddhar - 16.810 Engineering Design and Rapid Prototyping...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
16.810 IAP 2007 Engineering Design and Rapid Prototyping January 28, 2007 Version 1.3 Deliverable D Manufacturing Report System: MIT Space Elevator Team Beamed Ribbon Climber Component or Subsystem: Microwave Beaming System Team Name: The Rather-Naïve-About-Optics Team Team Member 1: Ethan Huwe Team Member 2: Arka P. Dhar Team Member 3: Chris Mandy 1. Microwave Circuitry Nearly all components of the waveguide circuitry will be purchased, so that manufacturing and assembly is rather limited. Waveguide components come equipped with 6 holes for 2.4mm diameter screws. Screws of 4cm length are long enough to protrude on both sides of the thick brass plate around the waveguide protrusions. All that is needed is to assemble the 12 Magnetrons 2-by-2 to beam combiners, combining four of these 6 pairings into two more pairings, and combining these new parings with another pair, so that the magnetrons are grouped in two groups of 6. Combining these two groups with the quadrature coupler yields a single
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 11/08/2011 for the course AERO 16.810 taught by Professor Olivierdeweck during the Winter '07 term at MIT.

Page1 / 4

projddhar - 16.810 Engineering Design and Rapid Prototyping...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online