assn5 - MIT OpenCourseWare http/ocw.mit.edu 4.500...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
MIT OpenCourseWare http://ocw.mit.edu 4.500 Introduction to Design Computing Fall 200 8 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms .
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
4.500 INTRODUCTION TO COMPUTATION Massachusetts Institute of Technology Department of Architecture 3D Printing October 21, 2008 Assignment #5 2 - PHYSICAL MODEL - is due in lecture on Tuesday, November 4, 9:30 am. Models should be left on the shelves in Studio 7. The work on digital fabrication starts with 3D printing, this assignment is design modeling and fabrication in one. As you will all see, models from the class will range results in size and shape. Printed models can also range in detail, best are models that walk a fine line between too much detail and strength in modeling. A major advantage of u 3D printing is its ability to manufacture many different types of models. Although the model below appears to be the same model printed 4 times, each is a variation of the original design. Note - You are not required to model and print 4 designs you are only required to print one. Carefully follow the steps on the proceeding pages they will help you get through production and
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 11/10/2011 for the course ARCH 4.500 taught by Professor Lawrencesass during the Fall '08 term at MIT.

Page1 / 5

assn5 - MIT OpenCourseWare http/ocw.mit.edu 4.500...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online