assn5_example3

assn5_example3 - Assignment#5 Cut Sheets Top and side...

Info iconThis preview shows pages 1–6. Sign up to view the full content.

View Full Document Right Arrow Icon
MIT OpenCourseWare http://ocw.mit.edu 4.510 Digital Design Fabrication Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms .
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
4.510 - Digital Design Fabrication Assignment #5 Design Summary - We investigated using a two prong clip joint for both the warm-up exercise and the panel construction design. After a series of mock ups, we made several design changes before constructing our nal prototype. Initially, our joint was about half the length and used a different assembly procedure, but we learned that a longer pro le was more exible and a larger hole would be required to rotate the pieces within each other. Warmup - Snap- t Joint Two prong snap ensured a snug t.
Background image of page 2
4.510 - Digital Design Fabrication
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Background image of page 4
Background image of page 5

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Background image of page 6
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Assignment #5 Cut Sheets: Top and side interior joints Top and bottom coner joints Center interior joint Bottom interior joint No feet Feet 6 pieces 2 pieces 4 pieces 2 pieces 6 pieces 2 pieces 4 pieces 2 pieces Scale 1:2A Scale 1:A 4.510 - Digital Design Fabrication Assignment #5 Wall Joint Conditions: Joint becomes plug at top corner No feet needed for side and top connections Feet at base Two tabs to prevent shear Design based on Assembly Requirements: Gap to fit snap-fit heads Narrow neck for rotation Thin enclosure for bending Enclsoure tabs to hold in place 4.510 - Digital Design Fabrication Assignment #5 4.510 - Digital Design Fabrication Assignment #5 Final Design Joint Detail...
View Full Document

{[ snackBarMessage ]}

Page1 / 6

assn5_example3 - Assignment#5 Cut Sheets Top and side...

This preview shows document pages 1 - 6. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online