assn7 - MIT OpenCourseWare http://ocw.mit.edu 4.500...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: MIT OpenCourseWare http://ocw.mit.edu 4.500 Introduction to Design Computing Fall 200 8 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms . 4.500 INTRODUCTION TO COMPUTATION Massachusetts Institute of Technology Department of Architecture Assignment 7 April 4, 2005 Digital Fabrication - Design Model This assignment is due in lecture on Tuesday, April 11 Reading Reference: Residential Framing: A Homebuilder's Construction Guide by William P. Spence This assignment is part 1 of three assignments focused on the physical representing your CAD models using rapid prototyping devices. Your job will be to build a physical model of an area of your dorm room using rapid prototyping technologies in this case the laser cutter and 3D printing. For this assignment you are required to turn in a 3D model of and a printout on paper for lecture similar to fig a and c, of a detailed area of your model. The model will be physically built in two stages. The first stage fig a and c, of a detailed area of your model....
View Full Document

Page1 / 5

assn7 - MIT OpenCourseWare http://ocw.mit.edu 4.500...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online