Logic EXP7 Results

Logic EXP7 Results - Joshua Dean Berk Bozoklar, Eric...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Berk Bozoklar, Eric Herrera Experiments 7 Multiplexer February 9, 2011 The George Washington University School of Engineering and Applied Science ECE 2140 Design of Logic Systems Lab Section 32 Jie Chen Multiplexer Abstract: This lab provides an introduction to Digital Logic Systems by using a Dual 4-input Multiplexer (74153), Power Supply, Digital Voltmeter, and Function Generator. Introduction: The main goal of this laboratory is to observe the input output characteristics and transfer function of the multiplexer. This was to be accomplished by using a DC Power Supply and a DMM. The objective of this lab will be accomplished when gate’s logical operations are functionally observed. Equipment: Multiplexer Power Supply Digital Multimeter Function Generator Breadboard Method: The multiplexer data sheets was downloaded. The purpose of downloading the data sheet was to find the location of the I/O pins, Vcc, and ground. The data sheet was also used to find the absolute maximum voltages, which each pin could operate along with the nominal operating conditions of the multiplexer. Joshua Dean
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 11/14/2011 for the course ECE 2140 taught by Professor Carrol during the Spring '11 term at GWU.

Page1 / 3

Logic EXP7 Results - Joshua Dean Berk Bozoklar, Eric...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online