Lab 12

# Lab 12 - =0.004684 V R4 =4.67v Experiment a simple design...

This preview shows pages 1–6. Sign up to view the full content.

Lab 11 Name:ZhangChaojun Partner: Tielong Gutian Introduction In this lab class, we work with the circuit with diode. We make the circuit and get the voltage from circuit. Then we use the Pspice to check our answer. Finally we have design a voltage divide and check with Pspice. Simple diode circuits 1. Node voltage: 9.278v I R1 =0.009278A V r2 =8.56v I Diode1 =0.00856A

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
Pspice verification 2. Node voltage: 9.996v
V R1 =9.259v I diode1 =0.009259A V R2 =9.26v I diode =0.009259A PsPIce verification 3.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
V R3 =7.249v I diode3 =0.007249 V R3 =4.99v V R2 =5.00v V R1 =4.684c I diode1

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: =0.004684 V R4 =4.67v Experiment a simple design project for this lab In this part we need to design a project for it. Give a voltage exceed 5.7 but no never be lower than 0.7v Then we Place a 10Vpp sine wave at the input with a frequency of 1 KHz. Take a picture of this output on the oscilloscope Conclusion For this lab class, we know much about the diode, and we do it in circuit and Pspice. Then we confirm our result by these data, that’s all we did in this lab class....
View Full Document

{[ snackBarMessage ]}

### Page1 / 6

Lab 12 - =0.004684 V R4 =4.67v Experiment a simple design...

This preview shows document pages 1 - 6. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online