Lab9 - EE 201 Lab9 Tian Gu Code:721 Team partner: Tielong...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: EE 201 Lab9 Tian Gu Code:721 Team partner: Tielong Su Chaojun Zhang Introduction : In this lab, we understood the transformers and after that under rectifier and how do they supply voltage. And we knew how to design a circuit which delivers three outputs. The Input Section of the Power Supply We built the circuit first. According to the Lab guide, we need a load which with 8.6 k resistance. But we cannot find any resistor like that. So we picked a resistor with 20000 resistance instead. Here is the input signal of the rectifier: According to the guide, we will have the DC output at this point with a very large amount of ripple . And here is what we got, Then we smoothed the ripple with creating a filter. The Output Section of the Power Supply: We simulated the initial circuit with PSpice and came up with the following basic initial circuit....
View Full Document

This note was uploaded on 11/17/2011 for the course EE 201 taught by Professor Kruempel during the Spring '06 term at Iowa State.

Page1 / 4

Lab9 - EE 201 Lab9 Tian Gu Code:721 Team partner: Tielong...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online