BRAE312 Lab 5 HGL 2010 - styles

# BRAE312 Lab 5 HGL 2010 - styles - BRAE 312 Lab 5 HGL Part I...

This preview shows pages 1–2. Sign up to view the full content.

BRAE 312 - Lab 5 HGL Part I. HGL Exercise - Pump to Buffer Reservoir at WDF Elevations: Elevation of the top of the pump pad = 100' Elevation of the top of the wall of the buffer reservoir = 117.68' Other vertical distance: Pond water level to the top of the pump pad = ____________ft. Height of schrader valves above the pump pad Before check valve = ____________ft. After check valve = ____________ft. Before butterfly valve = ____________ft. After butterfly valve = ____________ft. Instructions so that there is a pressure loss (5-15 psi) across it when Pump #1 is on. Once it is adjusted, leave it in that position. - Upstream of the check valve - Downstream of the check valve - Downstream of the 18in butterfly valve - Upstream of the 18in butterfly valve - Also, measure the distance from the top of the buffer reservoir wall to the water level in the buffer reservoir. To do: of (Pump #1) plus (Pump #2) when tested separately? Why or why not? 3. Explain the changes in the slope of the HGL between each of the points. Basic data : 1. Turn on Pumps #1 and #2 until water begins to spill over the buffer reservoir spillway. 2. Turn off Pump #2, so that only Pump #1 is on. 3.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 11/18/2011 for the course BRAE 433 taught by Professor Styles during the Fall '10 term at Cal Poly.

### Page1 / 7

BRAE312 Lab 5 HGL 2010 - styles - BRAE 312 Lab 5 HGL Part I...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online