Physics II Lab w answers_Part_55

Physics II Lab w - Calculate the series resistance and fill factor Results 1 The I-V characteristic was drawn for given solar cell for two

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
121 Experiment 19 I-V Characteristic of Solar Cell Observations and Results Table 1 Illumination 1 : Variac Voltage Illumination 2 : Variac Voltage S.No. Volts (mV) Current (mA) Power (mW) Volts (mV) Current (mA) Power (mW) Calculations : 1. Fill up Table 1 and identify the maximum power point for both illumination levels [P m1 and P m2 ] 2. Plot I vs. V for both illumination levels. 3. Mark P m1 and P m2 on the plots.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
122 4. Note down V and I (as in Fig. 5). 5.
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Calculate the series resistance and fill factor. Results: 1. The I-V characteristic was drawn for given solar cell for two illumination levels. 2. The open circuit voltages and short circuit currents for two different illuminations are measured as : V oc1 = ___________;V oc2 = ____________; I sc1 = _____________ and I sc2 = ____________ 3. The series resistance of the cell calculated using the two plots is ______________________. 4. Fill factor : (One graph paper required) ....
View Full Document

This note was uploaded on 11/26/2011 for the course PHY 2053 taught by Professor Lind during the Fall '09 term at FSU.

Page1 / 2

Physics II Lab w - Calculate the series resistance and fill factor Results 1 The I-V characteristic was drawn for given solar cell for two

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online