lab5 - First, attach the keyboard to the FPGA board. If key...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
EEL 5722C - FPGA Design fall 2011 University of Central Florida Lab Assignment #5 Display an image on a VGA monitor Objective: Throughout the lab #5, you will learn general principles behind storing and retrieving image data and processing them using an FPGA device. The raw image format is used for this lab – an image in which data is stored without any compression. Each pixel in the provided gray-scale image is represented by one byte. Thus, the value of a pixel in the image varies from 0 (0000_0000) through 255 (1111_1111).
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: First, attach the keyboard to the FPGA board. If key “0” is pressed, the image has to be run through a Low Pass Filter (LPF) and displayed on the screen. Use the following coefficients to filter the image: LPF: 1/9 [1 1 1; 1 1 1; 1 1 1]; Remember that the operation is repeated whenever the key is pressed by the user. And more and more blurred image will be displayed on the monitor when the LPF operations are repeated....
View Full Document

This note was uploaded on 11/23/2011 for the course EEL 5722c taught by Professor Lin during the Spring '11 term at University of Central Florida.

Ask a homework question - tutors are online