# lab 7 (2) - Ravneet Kaur 11763216 ECEL 303 062 Prelab 7...

This preview shows pages 1–3. Sign up to view the full content.

Ravneet Kaur 11763216 ECEL 303- 062 Prelab 7: Procedure for Lab 8 Part 1: Free Running Oscillator .................. Equation 1 To = 1/Fo Measure the frequency when for RB=RA= 10k and compare with equation 1 Then vary Ra i. Compare measured frequencies of output with equation 1 ii. Plot RA vs. frequency iii. Observe the affect of varying RA on duty cycle Using the decade box, vary R A and R B individually from 100Ω to 10kΩ in logarithmic steps. Obtain capacitors from approximately 1nF to 10μF, and test the circuit with each capacitor value. For each variance of resistance or capacitance, note the frequency and duty cycle. Plot the output frequency vs. resistance and capacitance. Part 2: DC Sweep VCO equation …………Equation 2

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
Ravneet Kaur 11763216 ECEL 303- 062 Figure 2: Frequency Sweep Circuit Diagram Reset all circuit element values to their defaults . Remove short between pins 7 and 8 Attach a DC supply to pin 8 RA = RB = RC = 10 kΩ and CT = 3.3nF Sweep DC source (VCC) at pin 8 from 15V(0.75V
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 12/02/2011 for the course ECEL 353 taught by Professor Gerber during the Spring '11 term at Hanoi University of Technology.

### Page1 / 3

lab 7 (2) - Ravneet Kaur 11763216 ECEL 303 062 Prelab 7...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online