ece209lab3

ece209lab3 - LAB 3 Introduction to Operational Amplifier...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: LAB 3 Introduction to Operational Amplifier and Step and Frequency Response of First Order Circuits Students Name: Adit Joshi Nick Novello Date : 04/20/10 Course Name : ECE 209 TA Name : Bo Ji Introduction: This lab is introduces simple circuits using operational amplifiers along with an investigation into the step response and frequency of these first-order circuits. The main objectives were: To verify the gain of the inverting amplifier To verify the gain of the non-inverting amplifier Measure time constant and frequency response of Low pass RC circuit Measure time constant and frequency response of High pass RC circuit Procedure: Refer to pages 33-35 of ECE 209 Course Packet Data: 1) Table for measuring internal resistance of a voltmeter. Vs Voltmeter Range Measured R1 Measured R2 Measured Vm Calculated Rv Given Rv % error Rv 4V 5V 0.9835M 0.9778M 1.9375V 16.6 M 10M 66% 20V 50V 0.9835M 0.9778M 9.6500V 14.7 M 11M 33% 2) Data for measuring internal resistance of an ammeter.2) Data for measuring internal resistance of an ammeter....
View Full Document

This note was uploaded on 12/07/2011 for the course ECE 209 taught by Professor Staff during the Spring '08 term at Ohio State.

Page1 / 5

ece209lab3 - LAB 3 Introduction to Operational Amplifier...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online