13_ch 12 Mechanical Design budynas_SM_ch12

# 13_ch 12 Mechanical Design budynas_SM_ch12 - c min . See if...

This preview shows page 1. Sign up to view the full content.

316 Solutions Manual • Instructor’s Solution Manual to Accompany Mechanical Engineering Design Trial #1 : • Choose a value of T f . • Find the corresponding viscosity. • Find the Sommerfeld number. • Find fr / c , then H gen = 2545 1050 WNc ± fr c ² • Find Q / ( rcNl ) and Q s / Q . From Eq. (12-15) ± T = 0 . 103 P ( fr / c ) (1 0 . 5 Q s / Q )[ Q / ( rcN j l )] H loss = ¯ h CR A ( T f T ) 1 + α • Display T f , S , H gen , H loss Trial #2 : Choose another T f , repeating above drill. Trial #3 : Plot the results of the ﬁrst two trials. Choose ( T f ) 3 from plot. Repeat the drill. Plot the results of Trial #3 on the above graph. If you are not within 0.1°F, iterate again. Otherwise, stop, and ﬁnd all the properties of the bearing for the ﬁrst clearance,
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: c min . See if Trumpler conditions are satised, and if so, analyze c and c max . The bearing ensemble in the current problem statement meets Trumplers criteria (for n d = 2). This adequacy assessment protocol can be used as a design tool by giving the students additional possible bushing sizes. b (in) t b (in) 2.254 0.004 2.004 0.004 1.753 0.003 Otherwise, the design option includes reducing l / d to save on the cost of journal machin-ing and vender-supplied bushings. H H gen H loss , linear with T f ( T f ) 1 ( T f ) 3 ( T f ) 2 T f...
View Full Document

## This note was uploaded on 12/13/2011 for the course EML 3013 taught by Professor Shingley during the Fall '11 term at UNF.

Ask a homework question - tutors are online