Vise_collar_hints...

Vise_collar_hints... - the RIGHT plane now that will serve...

Info iconThis preview shows pages 1–5. Sign up to view the full content.

View Full Document Right Arrow Icon
V_Collar_xxx (1 of 5) The following is a potential solution for the collar –less the 13/16 UNEF LF (left- hand) threads. This part should only take a matter of minutes to complete. Start by sketching a pair of circles…. .
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
V_Collar_xxx (2 of 5) …use the Modify Dimension tool to set the dimensions as they are shown in the drawing…. (Note: Uncheck the Regenerate and Lock Scale boxes.
Background image of page 2
V_Collar_xxx (3 of 5) …. Then accept the sketch and extrude it to the proper length.
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
V_Collar_xxx (4 of 5) A rectangle can be sketched on
Background image of page 4
Background image of page 5
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: the RIGHT plane now that will serve as the slot in the collar. For this rectangle, a centerline was drawn along the vertical axis and a three-sided figure was drawn on the right-hand side, then mirrored. Set the two dimensions as indicated in the drawing and accept the sketch. V_Collar_xxx (5 of 5) A cut-extrude (i.e. remove material) using the mid-plane setting will complete the part, less the threads. For this task, check out the notes on the helical sweep, and on reordering features....
View Full Document

{[ snackBarMessage ]}

Page1 / 5

Vise_collar_hints... - the RIGHT plane now that will serve...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online