pcm_hw_instructions

pcm_hw_instructions - parameters Run the simulation by...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Department of Chemical Engineering University of California, Santa Barbara ChE 152B Winter, 2010 Starting PCM 1. Run the PCM_installer.exe 2. Once PCM has been installed, you can start the software by typing PCM at the Matlab command prompt 3. For the homework problems, select the diabetes module 4. Select the modules corresponding to the description in the homework: a. Bergman b. PID c. FF d. MPC Running Simulations To make changes to any block parameters, click on the block and enter your
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: parameters Run the simulation by executing the Simulink model To make changes to any settings while the simulation is running, you must pause the simulation first Results from each simulation will be saved by clicking the radio button Save on the figure window Ensure that your results have a unique filename to avoid overwriting results...
View Full Document

This note was uploaded on 12/29/2011 for the course CHE 152b taught by Professor Ceweb during the Fall '10 term at UCSB.

Ask a homework question - tutors are online